No Products in the Cart
Easy to start brushcutter for working on areas of tough grass. Multifunction controls, bike handle, STIHL 2-MIX engine, straight shaft, single strap harness, AutoCut mowing head.Comes standard with fully adjustable bike handle and AutoCut line head.mall areas of grass and around obstacles. Ideal for edging as well as for small areas of grass. The loop handle can easily be adjusted for comfortable operation without the use of tools.
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.
For use with loop handle machines.
|Power output hp||1.1|
|Weight kg 1)||5.2|
|Sound pressure level with plastic tool dB(A) 2)||93|
|Sound power level dB(A) 2)||108|
|Vibration value, left with plastic tool m/s2 3)||4.7|
|Power output kW/bhp||0.8/1.1|
|Weight kg 4)||5.2|
|Vibration value, right with plastic tool m/s2 3)||3.8|
|Standard cutting tool||AutoCut C 26-2|
|Total length cm 5)||170|
|Handle type||Tool-free handle adjustment / mower handlebar|
|Cutting diameter mm||420|
|Anti vibration system||No AV-System|
|Tank volume l||0.34|
|Tank cap||STV screw tank cap|
1) Without fuel, cutting tool and without protection
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²
4) without cutting tool and deflector
5) Without cutting tool