No Products in the Cart
The HLA 66 is a new professional lightweight cordless long-reach hedge trimmer in the AP system product range. An evolution of the HLA 65 with better balance for less fatigue during operation, a new ergonomic control handle with the self resetting Ergo lever for left and right handers all packaged in a new stylish design. A loop handle for use on the tops of hedges, a catcher plate and base protector are all available as accessories. Perfect for the majority of tall and wide hedges at 205 cm long with a 50cm/20” double side, double edge blade and adjustable working angle head from -45° to +70°. The head will also fold flat for easy transport at just 132 cm total length. Perfect for small garden maintenance businesses, grounds keepers, gardeners and landscapers for trimming of tall hedges, side and top growth with catcher plate. The HLA 66 provides constant work output, good balance, excellent cutting performance and use in the rain and wet conditions is possible.
Working time with recommended AP 200 battery is up to 144 minutes.
NOTE - This is the machine only, battery and charger must be purchased separately. Image shows battery fitted (the battery does not come with this machine)
The battery in the shaft of the HLA enables balance during use and allows for fatigue-free work.
The ergonomic operating handle has an intuitive start process and is easy to use for right and left hand users.
The double-sided cutting plate is ground on both sides and ensures a clean cutting pattern.
The cutter bar can be adjusted from -45° to 70° and can be folded and locked parallel to the shaft for transport.
The STIHL brushless electric motor (EC) is very energy efficient and practically maintenance free. Thanks to its outstanding efficiency, the battery power is directly translated into impressive performance. During operation, the electronically controlled EC motor permanently monitors the load and adjusts the engine accordingly.
For protection of the blade and to allow safe, easy transport this cordless long reach hedge trimmer is equipped with a blade guard.
Protects the tip of the hedge trimmer's cutting blade from wear and tear while working in contact with the ground.
Technical data | Value |
---|---|
Total length cm | 205 |
Sound pressure level dB(A) 1) | 80 |
Cordless technology | AP System |
Recommended battery | AP 200 |
Weight kg 2) | 3.8 |
Blade length cm | 50 |
cutting capacity mm | 26 |
Sound power level dB(A) 3) | 91 |
Vibration value, left m/s2 4) | 2.3 |
Vibration value, right m/s2 4) | 1.8 |
Stroke rate rpm | 3.000 |
Tooth spacing mm | 33 |
Working time with AP 100 battery min 5) | up to 72 |
Working time with AP 200 battery min 5) | up to 144 |
Working time with AP 300 battery min 5) | up to 180 |
Working time with AP 300 S battery min 5) | up to 223 |
1) K-factor according to DIR 2006/42/EC = 2.5 (dB (A))
2) With blade, with handle, without protection, without battery
3) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
4) K-factor according to DIR 2006/42/EC = 2m / s ²
5) Battery working times are approximate and may vary depending on application
The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change